The Standard-Type jaws come with a knurled pattern on the jaw-face to better grip the sprue / part.

The C-Type jaws have sensors added to them to detect when the jaws are in the closed state with a part/sprue clamped within them.

*Includes sensor: SN 1.5, SP 1.5, SN 1.5-P, SP 1.5-P or SP 1.5 PM1.2

The following jaw types are available with this configuration:

• C (C-Type): With sensor.
  Available in 10-8, 10-10, 10-12, 20-16, 20-22 and 20-32 size bodies.
  
  
• CT (T-Type): Tooth jaw with sensor.
  Available in 20-16, 22 G and 20-22 G size bodies.
  
  
• LC (L-Type): Long jaw smooth with countersink and with sensor jaw with teeth.
  Available in 20-16 size body.
  
  
• LCT (L-Type): Long jaw with teeth and countersink holes for weight reduction, and has a sensor with teeth.
  Available in 20-16 size body.
  
  
• RTC (R-Type): Tooth jaw without weight reduction holes with a sensor.
  Available in 20-16 size body.
  
  
• KTC (KT-Type): Equatorial diameter jaw with sensor.
  Available in 20-16 and 20-22 size bodies.
  
  
• STC (ST-Type): Saw tooth jaw with external sensor.
  Available in 10-10, 10-12, 20-16, 22 G and 20-22 G size bodies.
  
  
• SCC (ST-Type): Saw tooth jaw with internal sensor.
  Available in 22 G and 20-22 G size body.
  
  

The D-Type jaws have an axial diameter to pick parts that are round, and increased sprue contact area.

The KT-Type jaws have an equatorial diameter to pick parts that are round.

The following jaw types are available with this configuration:

• KT (KT-Type): Equatorial diameter jaw.
  Available in 10-10, 20-16, 22 G and 20-22 G size body.
  
  
• KTC (KT-Type): Equatorial diameter jaw with sensor.
  Available in 20-16 and 20-22 size bodies.
  
  

The L-Type jaws increase the length to allow for a greater variation in location of the sprue / part.

*Includes sensor: SN 1.5, SP 1.5, SN 1.5-P, SP 1.5-P or SP 1.5 PM1.2

The following jaw types are available with this configuration:

• L (L-Type): Standard size of L-Type smooth with countersink holes for weight reduction.
  Available in 20-16 size body.
  
  
• LC (L-Type)*: Long jaw smooth with countersink and with sensor jaw with teeth.
  Available in 20-16 size body.
  
  
• LT (L-Type): Long jaw with teeth and countersink holes for weight reduction.
  Available in 20-16 size body.
  
  
• LCT (L-Type)*: Long jaw with teeth and countersink holes for weight reduction, and has a sensor with teeth.
  Available in 20-16 size body.
  
  
• LST (L-Type): Long jaw with the full surface of saw teeth.
  Available in 20-16, 22 G and 20-22 G size body.
  
  

The NP-Type jaws add nitrile rubber pad to the jaws to prevent marring of finished parts.

The R-Type jaw removes the countersinks from the jaw face.

*Includes sensor: SN 1.5, SP 1.5, SN 1.5-P, SP 1.5-P or SP 1.5 PM1.2

The following jaw types are available with this configuration:

• R (R-Type): Flat and smooth with no gripping pattern to avoid marking of a part being gripped.
  Available in 20-16 size body.
  
  
• RT (R-Type): Flat with teeth, allowing for a larger gripping surface area. This prevents hot plastic from getting caught inside the countersink holes of the T-type.
  20-16 and 20-32 size body.
  
  
• RTC (R-Type): Tooth jaw without weight reduction holes with a sensor.
  Avalible in 20-16 size body.
  
  

The ST-Type jaw adds aggressive teeth to clamp into the sprue.

*Includes sensor: SN 1.5, SP 1.5, SN 1.5-P, SP 1.5-P or SP 1.5 PM1.2

The following jaw types are available with this configuration:

• LST (L-Type): Long jaw with the full surface of saw teeth.
  Available in 20-16, 22 G and 20-22 G size body.
  
  
• ST (ST-Type): Used for aggressive teeth to clamp into the sprue.
  Available in 10-10, 10-12, 20-16, 22 G and 20-22 G size bodies.
  
  
• STC (ST-Type)*: Saw tooth jaw with external sensor.
  Available in 10-10, 10-12, 20-16, 22 G and 20-22 G size bodies.
  
  

The T-Type jaws adds diagonal teeth to the jaw-face to prevent slipping of the material being grabbed.

*Includes sensor: SN 1.5, SP 1.5, SN 1.5-P, SP 1.5-P or SP 1.5 PM1.2

The following jaw types are available with this configuration:

• T (T-Type): Tooth jaw.
  Available in 20-16, 22 G and 20-22 G size bodies.
  
  
• CT (T-Type): Tooth jaw with sensor.
  Available in 20-16, 22 G and 20-22 G size bodies.
  
  
• KT (KT-Type): Equatorial diameter jaw.
  Available in 10-10, 20-16, 22 G and 20-22 G size body.
  
  
• KTC (KT-Type): Equatorial diameter jaw with sensor.
  Available in 20-16 and 20-22 size bodies.
  
  
• LT (L-Type): Long jaw with teeth and countersink holes for weight reduction.
  Available in 20-16 size body.
  
  
• LCT (L-Type): Long jaw with teeth and countersink holes for weight reduction, and has a sensor with teeth.
  Available in 20-16 size body.
  
  
• RT (R-Type): Flat with teeth, allowing for a larger gripping surface area. This prevents hot plastic from getting caught inside the countersink holes of the T-type.
  20-16 and 20-32 size body.
  
  
• RTC (R-Type): Tooth jaw without weight reduction holes with a sensor.
  Avalible in 20-16 and 20-16 body.
  
  

The VP-Type jaws add viton rubber pad to the jaws to prevent marring of finished parts.